Draft Animal Power – Draft animals and sustainable land stewardship › Forums › Equipment Category › Equipment › Manure Spreader Apron Chain
- February 15, 2018 at 1:15 pm #96053Tyler SageParticipant
I am looking to replace a broken apron chain on an old 4 wheeled, ground driven International manure spreader. I can’t find the right size chain anywhere on the internet. The chain i need to replace has a pitch of 3″, the pitch is measured from the center of each pivot point on a single link. The largest chain I can find on the internet is #67 which has a pitch of around 2.6″. This chain doesn’t fit properly on the sprockets. I sent an email to Macknair but haven’t heard back yet, thought I would see if any out there had any leads.February 16, 2018 at 3:06 pm #96060JayParticipant
What brand is the spreader you have?February 17, 2018 at 3:02 pm #96062Tyler SageParticipant
Norm got back to me and has the part needed. It seems International take a “S” style detachable chain, its a little hard to come by on the internet but Norm has it in stock.
Also looking for a sprocket that is connected to the rear beaters, part number 3258S. The art number is stamped into the teeth of the sprocket. Anyone have anything laying around?
- You must be logged in to reply to this topic.